Proceedings of the American Society for Composites 2014-Twenty-ninth Technical Conference on Composite Materials

SESSION I: AVIATION SAFETY AND AIRCRAFT STRUCTURES

• Industry and Regulatory Interface in Developing Composite Airframe Certification Guidance

CINDY ASHFORTH, LARRY ILCEWICZ and RUSTY JONES

• Applying a Stiffened Stitched Concept to Shear-Loaded Structure

DAWN JEGLEY

• Mode I Cohesive Law Characterization of Through-Crack Propagation in a Multidirectional Laminate

ANDREW C. BERGAN, CARLOS G. DÁVILA, FRANK A. LEONE, JONATHAN AWERBUCH and TEIN-MIN TAN

• Development of a High Fidelity Test Database for Failure Prediction

JORDAN J. HANDLER, JOSHUA S. DUSTIN, SALVATORE LIGUORE, ANDREW PARRISH and STEVEN WANTHAL

• Design Sensitivity of Hat-Stiffened Composite Panels

BO CHENG JIN, SHIV JOSHI, ADARSH PUN and STEVEN NUTT

• Flight Test Results of CFRP Speed Brake Structure Fabricated by VPH Molding Technique

YUTAKA IWAHORI, SUNAO SUGIMOTO, BROOKE SMITH and NAOKI YAMADA

• Effect of R-Ratio on Simulation Performance of Fatigue Debond Propagation in Laminated Composite Structure

GANG LI and CHUN LI

SESSION II: STRENGTH

• Multi-Axial Yielding, Plastic Flow and Failure Strength of PTFE/PEEK Composites

GANG LIU and SU SU WANG

• Modification of Fiber-Matrix Bond Strength through Surface Treatments

NICHOLAS E. HOLSMAN, BRENT A. HOLFORD, JERALD A. WESLEY, KEVIN W. WYNN and WILLIAM T. RIDDELL

• A Study of Compression and Shear Behavior of Two Types of Thermoplastic Composites

YUNFA ZHANG

• Statistical Prediction of Tensile Creep Failure Time for Unidirectional CFRP

MASAYUKI NAKADA, TSUGIYUKI OKUYA and YASUSHI MIYANO

SESSION III: CYTEC STUDENT PAPER

• Carbon Nanotube-Reinforced Hybrid Composites Enabled by the PopTube Approach

WILL GUIN, JIALAI WANG, XINYU ZHANG and JIM SMITH

• Open Microwave Heating of Polymer Resin Using Interdigital Electrode Film and Dispersed Carbon Nanotubes

SHINYA HATORI and RYOSUKE MATSUZAKI

• Computational Modeling of Curing Induced Damage Due to Compaction on Woven Fabric Composite

MD SHARIFUL ISLAM and PAVANA PRABHAKAR

• Investigation into Temperature Dependence on the Mechanical Behavior of a Thermoplastic Fabric for Deep-Draw Forming Applications

LISA M. DANGORA, JAMES A. SHERWOOD and JENNIFER L. GORCZYCA

SESSION IV: ARMOR AND PROTECTION

• Projectile Impact on Kevlar Fabric Including Scaling Effects

M. PANKOW

• Experimental Study of Shear Behavior of Kevlar 49 Fabrics

DEJU ZHU, BARZIN MOBASHER and SUBRAMANIAM D. RAJAN

• Design of Ballistic Resistant Fibre Reinforced Nano-Ceramic-Plastic Composites

BOSE R. NRIPATI and BOSE PAPIA

• State of the Art in the Deterministic and Probabilistic Ballistic Impact Modeling of Soft Body Armor: Filaments to Fabrics

GAURAV NILAKANTAN and STEVEN NUTT

• Metacomposites Protection System against Primary Blast Injury

K. T. TAN and C. T. SUN

• Influence of Hot Rolling on Microstructure and Properties of Short Fiber Reinforced Metal Matrix Composite

ERIC KLIER, BRANDON MCWILLIAMS, BRADLEY KLOTZ, JIAN YU, JONATHAN MONTGOMERY, JIM SORENSEN and RICH ADAMS

SESSION V: NANOCOMPOSITES

• Predicting Mechanical Response of Crosslinked Epoxy Using ReaxFF

G. M. ODEGARD, B. D. JENSEN, S. GOWTHAM, J. WU, J. HE and Z. ZHANG

• Multi-Scale Modeling of Fracture Properties in Nano-Particle Reinforced Polymers

SAMIT ROY, AVINASH REDDY AKEPATI and VINU UNNIKRISHNAN

• Development Study of Ultra-Thin Fiber Reinforced Plastics Using Unidirectionally Aligned Carbon Nanotube Sheet

TAKASHI KAJINUMA, KEN GOTO, TRAN HUU NAM, SATORU YONEYAMA, SHUICHI ARIKAWA, YOSHINOBU SHIMAMURA, YOKU INOUE and KIMIYOSHI NAITO

• Nanostructure Control and Thermal Properties of Organic-Silica Nanocomposites by Using Perhydropolysilazane and Organic Polymers

HIROSHI NAKASEKO and REIKO SAITO

• Study the Effect of Nano-Clay Filled Carbon Fibre/Polypropylene Composite on Mechanical Properties

MOHAMED H. GABR, KIYOSHI UZAWA and ISAO KIMPARA

• Improved Mechanical Properties of Poly(Styrene-Block-Isobutylene-Block-Styrene) Due to Nanoclay Reinforcement

MAURO FITTIPALDI, LANDON R. GRACE and DAVID T. TSE

• Mechanical and Thermal Properties of Cellulose Nanofibers Reinforced Epoxy Polymer Nanocomposites

MD. NURUDDIN, T. H. MAHDI, M. V. HOSUR and S. JEELANI

• A Synergetic Coupling between Graphene and Carbon Nanotubes for Hybrid Carbon Fiber Composites

GLAUCIO CARLEY and ANTONIO AVILA

• Fracture Toughness and Delamination Crack Growth Rate of Graphene-Epoxy and Carbon-Graphene/Epoxy Nanocomposites

DAVID ALAN HAWKINS JR. and ANWARUL HAQUE

• Multi-Layer Graphene as Defect Inhibitor to Bonded Joints: The Environmental Effects Investigation

HERMANO NASCIMENTO JR. and ANTONIO ÁVILA

• Molecular Modeling of Thermo-Physical Properties of BMI Matrix and Its Interface with Amorphous Carbon Fiber

VIKAS VARSHNEY, AJIT K. ROY and JEFF BAUR

• Effect of Rigid Segment Content on the Piezoresistive Properties of Carbon Nanotube/Polyurethane Composites

CELIN LOZANO-PEREZ, ANGEL ROSADO-DZIB, GABRIEL JESUS POOL-BALAM, ROSSANA FARIDE VARGAS-CORONADO, ALEJANDRO MAY-PAT, JUAN VALERIO CAUICH-RODRIGUEZ and FRANCIS AVILES

• Processing and Properties of Epoxy-Impregnated Boron Nitride Nanotube Buckypaper

B. ASHRAFI, Y. MARTINEZ-RUBI, M. B. JAKUBINEK, K. S. KIM, A. HRDINA, C. T. KINGSTON, A. YOUSEFPOUR, A. JOHNSTON and B. SIMARD

SESSION VI: MULTIFUNCTIONAL

• Coupled Mechanical and Electrical Response of Carbon Nanotube Yarn Sensors for Self-Sensing Composite Materials

J. L. ABOT, T. ALOSH, A. BAJAR, D. RENNER, E. GOOD, B. SENSALE-RODRIGUEZ, S. AREZOOMANDAN and K. BELAY

• Selective Damage Sensing in Glass Fiber/Carbon Nanotubes/Vinyl Ester Smart Composites by Means of Electrical Resistance

JOSE DE JESUS KU-HERRERA, FRANCIS AVILES, ALEJANDRO MAY-PAT, VALERIA LA SAPONARA, RICARDO HAUCH RIBEIRO DE CASTRO and BRIAN PINTO

• Printed Carbon Nanotube Sensors for in situ Damage Recognition

ZACHARY R. MELROSE, ROSSINY BEAUCEJOUR and ERIK T. THOSTENSON

• Highly Conductive Heterogeneous Epoxy-Silver Composites by Phase Selective in situ Filler Synthesis

XAVIER CAUCHY, JOLANTA-EWA KLEMBERG-SAPIEHA and DANIEL THERRIAULT

• Predicting the Relative Permittivity of Water-Contaminated Glass/Epoxy Laminates at X-Band

LANDON GRACE, LUIS RODRIGUEZ, MAURO FITTIPALDI and CARLA GARCIA

• Multifunctional Properties of Multiwall Carbon Nanotube/Polyurethane Foams

J. J. ESPADAS-ESCALANTE, A. MAY-PAT and F. AVILES

• Innovation of Functionally Graded Carbon Nanotubes/Polymer Materials

QING-QING NI, TAKUMA ARAI, YI WANG and HONG XIA

• Self-healing of Transverse Cracks in Cross-Ply Composites Using a Microencapsulated Solvent-Based Healing System

SANG YUP KIM, NANCY R. SOTTOS and SCOTT R. WHITE

• Repeatable Self-Healing of an Epoxy Matrix Using Latent 2-Ethyl-4-Methylimidazole Catalyst

KEVIN R. HART, ERIC D. WETZEL, NANCY R. SOTTOS and SCOTT R. WHITE

• Active Cooling of Vascularized Composites for Application at Elevated Temperatures

ANTHONY M. COPPOLA, NANCY R. SOTTOS and SCOTT R. WHITE

• Processing of Degradable Polymer Fibers for Microvascular Pathways

VALENTIN SITTE, RICHARD A. POILLUCCI and CHRISTOPHER J. HANSEN

• Electrowetting Actuation Methods for Surface Morphology Control of Multifunctional Composites

MARRINER H. MERRILL, JAMES P. THOMAS, RAYMOND C. Y. AUYEUNG and ALBERTO PIQUE

• Manufacture and Characterization of Piezoelectric Broadband Energy Harvesters Based on Asymmetric Bistable Laminates

PETER HARRIS, CHRIS BOWEN, D. N. BETTS and H. ALICIA KIM

• Bioinspired Functionally Graded Shells and Plates: Exact Solutions

VICTOR BIRMAN

SESSION VII: EFFECTS OF DEFECTS

• Simulation of Composite Manufacturing Variations to Determine Stiffness and Strength Reductions in Automotive and Aerospace Structure

LYLE DEOBALD, CHUL Y. PARK, NIHAR DESAI, MADHAVADAS RAMNATH, OHCHANG JIN, DIRK LUKASZEWICZ and STEFAN KERSCHER

• A Design and Analysis Method for Automotive and Aerospace Composite Structures Including Manufacturing Variations

DIRK LUKASZEWICZ, SIMON HESSE, LAVINIA GRAFF, STEFAN KERSCHER, LYLE DEOBALD, CHUL Y. PARK and NIHAR DESAI

• Matrix-Dominated Deformation and Failure of VARIM Glass-Fabric/Vinyl Ester Composite: In-Plane Transverse and Interlaminar Damage Modes and Strengths

AKIRA MIYASE, LIGUO LI and SU SU WANG

• On Using the Open Hole Tension and Compression Specimens for Evaluating the Waviness Effects in Laminated Composites

SEYEDMOHAMMAD SHAMS and RANI ELHAJJAR

• X-ray CT Image-Based Measurement of Fiber Orientation Distribution in CFRP Laminates

RYOHEI HOSOYA, AKINORI YOSHIMURA, JUN KOYANAGI and SATORU YONEYAMA

• Fatigue Behavior of Notched Out of Autoclave Woven Carbon Composite Laminates

MAHDI GHAZIZADEH and AJIT D. KELKAR

• Effect of Voids on Microscopic Strain Distribution in CFRP Laminates

SHIGEKI ARATAMA, YUSUKE TSUMURA, MASAAKI NISHIKAWA and MASAKI HOJO

• The Coupled Effect of Microvoids and Hydraulic Fluid Absorption on Mechanical Properties of Quartz/BMI Laminates

KEITH R. HURDELBRINK II, ZAHED SIDDIQUE and M. CENGIZ ALTAN

• Characterization of Physical Properties and Morphology of PANI-Based Conductive Composites

VIPIN KUMAR, T. YOKOZEKI, T. GOTO and T. TAKAHASHI

• Evaluation of Out-of-Plane Properties of CFRP Laminates Obtained by 3-Point Bending and Direct Loading Tests

EIICHI HARA, TOMOHIRO YOKOZEKI, YUTAKA IWAHORI, HIROSHI HATTA and TAKASHI ISHIKAWA

• Evaluation of Impact Damage in Nonlinear Laminates Subjected to a Transverse Concentrated Load

HIROSHI SUEMASU, MAKOTO ICHIKI and MICHAEL R. WISNOM

• High-Velocity Impact Characteristic of Stitched Carbon/Epoxy Composites

YASUHITO MIKAMI, AKINORI YOSHIMURA, RYOHEI TSUJI and NAOYUKI WATANABE

• A Numerical and Experimental Study of Damage Growth in a Composite Laminate

MARK MCELROY, JAMES RATCLIFFE, MICHAEL CZABAJ, JOHN WANG and FUH-GWO YUAN

• Finite Strip Analysis of Cracked Laminate: Stress Based Plane Strain Approach

FARRUKH HAFEEZ and FAHAD ALMASKARI

SESSION VIII: PROCESSING OUT OF AUTOCLAVE

• Vacuum Bag Only Processing of Complex Shapes: Effect of Corner Angle, Material Properties and Processing Conditions

YIJIA MA, TIMOTEI CENTEA, GAURAV NILAKANTAN and STEVEN NUTT

• Void Entrapment into Air Pathways in Partially Impregnated Prepregs in the Out-of-Autoclave Process

THOMAS A. CENDER, VOLKAN ESKIZEYBEK, JOHN H. GANGLOFF JR. and SURESH G. ADVANI

• Silicone Rubber Properties During Advanced Composites Consolidation/Curing Using Specialized Elastomeric Tooling (SET)

PAUL MALEK and DANIEL WALCZYK

• The Effect of Curing Temperature on the Fracture Toughness of Fiberglass Epoxy Composites

THOMAS J. RYAN, AJIT D. KELKAR and EVAN KIMBRO

SESSION IX: SUSTAINABILITY/EFFICIENCY IN COMPOSITE PROCESSING

• Process Optimization for Compression Molding of Reused Prepreg Scrap

MING-SUNG WU, TIMOTEI CENTEA and STEVEN NUTT

• CFRP Recycling Technology Using Depolymerization under Ordinary Pressure

MITSUTOSHI NAKAGAWA, KEIICHI KASUGA, KOUICHI AOYAGI, KANAKO ISHIHARA, YUKARI IKEDA and KATSUJI SHIBATA

• Permeability Model of a Woven Fabric Based on Micron Resolution Computed Tomography Data

HELGA KRIEGER, SCOTT STAPLETON, GUNNAR SEIDE and THOMAS GRIES

• Process Modeling for Resin Transfer Molding of a Modified Heterocyclic Phenolic/Epoxy Blended Resin

TIMOTEI CENTEA, JONATHAN LO, MARK ANDERS and STEVEN NUTT

SESSION X: COMPOSITES PROCESSING

• Evaluation of Mechanical Properties of VaRTM-Prepreg Hybrid Composite

MASATO IGARASHI, HISAYA KATOH, SUNAO SUGIMOTO and YOSUKE NAGAO

• Effect of Distribution Media on Resin Flow during VaRTM Process for FRPs

HAYATO NAKATANI, KENTAROU ADACHI and KATSUHIKO OSAKA

• Resin Transfer Molding of Particle-Filled, Continuous-Fiber Reinforced Composites

TUGCE AYDIL, HAMED TANABI and MERVE ERDAL

• Evaluation of the Mechanical Properties and Molding Techniques for the Composite Material Using Four-Axis Preforms by VaRTM

MASAYA KENJO, MASATO IGARASHI, SHINICHI TAKEDA and YOSUKE NAGAO

• Evaluation of Residual Strain in Press Molding of CF/PPS Laminates Using FBG Sensors

TAKUHEI TSUKADA, SHIN-ICHI TAKEDA, YUTAKA IWAHORI, SHINYA HONDA, YOSHIHIRO NARITA, SHU MINAKUCHI and NOBUO TAKEDA

• Comparison of Mechanical Properties of CFRTP with Those of CFRP Using Same CF Fabrics

GOICHI BEN and WATARU ISHIDA

• Effect of Molding Condition on Flexural Strength of Textile Carbon Fiber Reinforced Polycarbonate Laminates

HIROAKI OZAKI, MASAYUKI NAKADA, KIYOSHI UZAWA and YASUSHI MIYANO

• Effect of Welding Conditions on Ultrasonic Welding Properties for Continuous Fiber Reinforced Thermoplastic Composite

ASAMI NAKAI, AKIO OHTANI and KAZUHO TAKEUCHI

SESSION XI: TEXTILES

• Comparison of Continuum and Cohesive Zone Damage Models for Laminated Composites under Uniaxial Loading

M. KEITH BALLARD and JOHN D. WHITCOMB

• Finite Element Models of 3D Woven Composites Based on Numerically Generated Micro-Geometry of Reinforcement

BORYS DRACH, ANDREW DRACH, IGOR TSUKROV, MARION PENVERNE and YURI LAPUSTA

• Numerical Predictions of Damage Initiation in 3D Woven Composites under Various Loading Conditions

IGOR TSUKROV, ANDREW DRACH, BORYS DRACH, HARUN BAYRAKTAR, JON GOERING and TODD GROSS

• An Enhanced Continuum Damage Mechanics Model for Crash Simulation of Composites

DANGHE SHI and XINRAN XIAO

• Effect of Variable R-Ratio Loading on Fatigue Life and Damage Accumulation in Plain-Weave Fabric Carbon/Epoxy Laminates

MASAMICHI KAWAI, KYOUNG-MO YANG and SHIOKI OH

• Locally Reinforced Woven Fabrics: Mechanical and Economical Evaluation

CHRISTOPHER LENZ, DOMINIK WIRMER, YVES-SIMON GLOY and THOMAS GRIES

• Fracture Properties of Glass/Carbon Intra-Hybrid Woven Fabric Composites

DAIKI ICHIKAWA, MASAYUKI KITAMURA, YUQIU YANG and HIROYUKI HAMADA

• The Creation of Super Lightweight CFRP Ablator and Evaluation of Its Thermal and Mechanical Properties

TOSHIHIRO KANAYA, HIDETAKA TOSHIMA, KEN GOTO, AKIO OTANI, SATORU YONEYAMA and SYUICHI ARIKAWA

• Finite Element Modeling to Predict the Formation of Out-of-Plane Defects During the Manufacture of Textile-Reinforced Composites

LISA M. DANGORA, JAMES A. SHERWOOD, JENNIFER L. GORCZYCA and CYNTHIA J. MITCHELL

• A Discrete Mesoscopic Finite Element Model Used as a Design Tool for Textile Composite Structures

CYNTHIA J. MITCHELL, JAMES A. SHERWOOD, LISA M. DANGORA AND JENNIFER L. GORCZYCA

• Full-Field Strain Analysis of Compressively Loaded Flat Composite Laminates with Undulated Fibers

TODD C. HENRY, CHARLES E. BAKIS, JARET C. RIDDICK and EDWARD C. SMITH

• Fabrication of Non-Crimp CFRP Pipe by Braiding Technique

YASUYOSHI KAKITAL, MASAYA HIROSE, TADASHI UOZUMI, AKIO OHTANI and ASAMI NAKAI

SESSION XII: COMPOSITES IN WIND ENERGY

• Structural Integrity of Large Composite Offshore Wind Turbine Rotor Blades

KING HIM LO, TUNG PEI YU and SU SU WANG

• Application of Structural Similitude Theory in Subcomponent Testing of Wind Turbine Blades

MOHAMAD EYDANI ASL, CHRISTOPHER NIEZRECKI, JAMES SHERWOOD and PETER AVITABILE

• Evaluation of the Thermal Damage in Glass Fiber Polymer-Matrix Composites in Wind Turbine Blades Subjected to Lightning Strike

YEQING WANG and OLESYA I. ZHUPANSKA

• Strength and Failure Modes of Thick-Adhesive Bonded Joints of Glass Fabric/Vinyl Ester Composite Laminates

BILL W. COLE, LIGUO LI and SU SU WANG

SESSION XIII: DESIGN AND MANUFACTURING

• Development of Fabrication Method and Burst Strength of CFRP Pressure Vessel Reinforced with Cylindrical Grid

KAZUHIRO SAKATA and GOICHI BEN

• Monolithic Thermoplastic Composite Pressure Vessels (Type IV) for On-board Automotive Hydrogen Storage

MICHAEL RUBY, DAVID ALMOND, MATTHEW TURNER and ANDREW CLARKE

• Development of Light Weight Composite Structural Guide Vane for Turbo Fan Engine

TAKAOMI INADA, HIROYUKI YAGI, HIDEO MORITA, RINTAROU KAJIWARA, TAKEHISA YAMADA, TSUTOMU MURAKAMI, KOJI MIYAZAWA, TAKEHIKO UCHIYAMA, KATSUYOSHI MORIYA and SHINICHI TANAKA

• The Development of a Conical Composite Energy Absorber for Use in the Attenuation of Crash/Impact Loads

JUSTIN D. LITTELL

• Process Efficiency Improvements for a Structural Doorframe Support Panel Molded from Unidirectional E-Glass/Polypropylene Composite Tapes

DAVID EASTEP, MANFRED REIF, MICHAEL BEGERT, MATHIAS GERSTER, ERIC SCHNEIDER, TOBIAS JOPPICH and SEBASTIAN BAUMGARTNER

• Study on the Laser Beam Cutting of Carbon Preform by Several Laser Equipment of Various Properties

HIROHITO HIRA, HIROMITSU ITOH, KODAI YAMADA and TOMOYUKI SUZUKI

• Optimum Parameters on Electro Fusion Joining of CF/PPS Composites by Carbon Fiber Heating Elements

DAIKI TANABE, KAZUAKI NISHIYABU and TETSUSEI KURASHIKI

• ISAAC—A Testbed for Advanced Composites Research

K. CHAUNCEY WU, BRIAN K. STEWART and ROBERT A. MARTIN

• Comparative Life Cycle Analysis of Tung Oil/Jute Fiber Bio-Composites to Synthetic Unsaturated Polyester Resins/E-Glass Composites

ELDON D. TRIGGS II, MAHESH V. HOSUR, ALFRED TCHERBI-NARTEH and SHAIK JEELANI

• Scaling Effects in Glass Reinforced Epoxy Filament Wound Tubes Subjected to Quasi Static Indentation

FARRUKH HAFEEZ and FAHAD ALMASKARI

• Analysis of Residual Thermal Stresses in Metal/PMC Composite Systems

G. NEWAZ, A. SEYED YAGHOUBI and G. S. DHALIWAL

• Non-Fickian Moisture Absorption in Polymers Coated with a Thin Nanocomposite Layer

GORKEM E. GULOGLU and M. CENGIZ ALTAN

• Unit Cell Modeling to Predict Permeability for Composite Manufacturing

TIMOTHY LUCHINI, STEPHEN SOMMERLOT and ALFRED LOOS

• Effect of Humidity and Cyclic Heat on the Static and Dynamic Performance of Composite-Based Lightweight Materials

SAYED NASSAR and KAORI SAKAI

• Effect of Fiber Content on the Aspect Ratio of Process-Induced Microvoids and the Implications to the Tensile Properties of Composite Laminates

J. P. ANDERSON and M. C. ALTAN

• Mechanical Properties of CFRP in the Spray Up Fabrication Method

TETSUO KIKUCHI, YUKA TAKAI, AKIHIKO GOTO and HIROYUKI HAMADA

• Analysis of Bi-Material “Thermostat” Strip Specimen for Predicting Cure Induced Shrinkage

OLEKSANDR G. KRAVCHENKO, SERGII G. KRAVCHENKO and R. BYRON PIPES

• Modeling Advancing Flow Fronts in Composite Manufacturing

STEPHEN SOMMERLOT, TIMOTHY LUCHINI and ALFRED LOOS

• Fatigue Performance of a Structural Reaction Injection Molded Composite

SIDDHARTH VALLURI and P. K. MALLICK

• Bending Stress and Deflection Analysis of Carbon Nanotube Reinforced Composite Skew Plates

AMIN JOODAKY, ANWARUL HAQUE and IMAN JOODAKY

• Hybrid Polymer Composites Based on Graphite Nanoplatelets and Glass Fibers

DIEGO PEDRAZZOLI, ALESSANDRO PEGORETTI and KYRIAKI KALAITZIDOU

• Investigation of Stabilization Conditions of Electrospun Carbon Nanofibers for Improved Mechanical Performance

BIPUL BARUA and MRINAL C. SAHA

SESSION XIV: STABILITY AND POSTBUCKLING

• Experimental Evaluation of Fatigue Damage Progression in Postbuckled Single Stringer Composite Specimens

CHIARA BISAGNI, CARLOS G. DÁVILA, CHERYL A. ROSE and JOSEPH N. ZALAMEDA

• Postbuckling Analysis of Composite Stiffened Panel under Shear Load for Assessment of Delamination Propagation between Skin and Stringer

KEISUKE UMEZAWA and TAKAHIRA AOKI

• A New Inverse Hyperbolic Zigzag Theory for the Static and Buckling Analysis of Laminated Composite and Sandwich Plate

ROSALIN SAHOO and BHRIGU NATH SINGH

• Buckling Behavior and Optimal Design of Cylindrical Lattice Structure

SHUNSUKE YOSHINO, TAKAHIRA AOKI, TOMOHIRO YOKOZEKI, KEITA TERASHIMA and TORU KAMITA

SESSION XV: CRASHWORTHINESS

• Dynamic Material Characterization of Laminated Composite Materials—A Path for Test Method Development

J. F. ACOSTA, G. OLIVARES, S. KESHAVANARAYANA, M. T. SIDDIQUI and I. ECHAVARRI

• Axial Crushing Behavior of Braided Tubular CFRP

RYO IWASAKI, YOSHIO AOKI, AKIHISA TABATA, TATSUYA ISONO and SUGURU SHIMIZU

• Multiscale Simulation Strategy for Low-Velocity Impact on FRP

CLAUDIO S. LOPES, SERGIO SÁDABA, FERNANDO NAYA and CARLOS GONZALEZ

• Deformation Mechanisms and Energy Absorption in the Crushing of Cellular Solids

ROYAN J. D’MELLO and ANTHONY M. WAAS

SESSION XVI: IMPACT AND DYNAMIC RESPONSE

• Evaluation on Impact Damage of Textile Carbon Fiber Reinforced Polycarbonate Composite

HIROSHI SAITO, HIROAKI OZAKI, MASAYUKI NAKADA and YASUSHI MIYANO

• Modeling the Behavior of Impact Induced Multiple Delaminations under Compressive Load

CHRISTOPH PAUL DIENEL

• Modeling and Simulation of Impact and Perforation in Fiber Reinforced Composites

MEHRAN TEHRANI, AYOUB Y. BOROUJENI and MARWAN S. AL-HAIK

• Stress Analysis in the Vicinity of the Impact Zone in the Transversely Isotropic Composite: An Exact Analytical Solution to the 3D Problem

OLESYA I. ZHUPANSKA

• Use of a New Portable Instrumented Impactor on the NASA Composite Crew Module Damage Tolerance Program

WADE C. JACKSON and DANIEL L. POLIS

• Loading Rate Effects on Mode I Delamination of Z-Pinned Composite Laminates

NIRANJAN D. PARAB, ANDREW SCHLUETER and WEINONG CHEN

• Strain Rate Strengthening and Failure Behavior of Filament Wound Composites

AMANDA S. WU, DAVID URABE, VICTOR HEPA, WILLIAM ELMER and MICHAEL J. KING

• Dynamic Hydrostatic Tension in Polyurea and Polyurea-Based Composites

ALIREZA V. AMIRKHIZI

SESSION XVII: KEITH KEDWARD SYMPOSIUM

• Strength Prediction of Single Lap Joint Using CTOA

N. M. RAHMAN, H. QIAN and C. T. SUN

• Predictions of Delamination Growth for Quasi-Static Loading of Composite Laminates

JIAWEN XIE and ANTHONY M. WAAS

• Failure of Curved Composites due to Through-Thickness Tensile Stresses

MICHAEL R. WISNOM

• The Inclusion of Arbitrary Load Histories in the Strength Decay Model for Stress Rupture

JAMES R. REEDER

• Damage Tolerant Sandwich Panel Core with Low Moisture Affinity

KEITH R. LOSS

• A Unified Analysis from Composite Laminates to Composite Beam Structures

WEN S. CHAN

SESSION XVIII: NATURAL, BIO-BASED & GREEN COMPOSITES

• A New Process for Manufacturing Biocomposite Laminate and Sandwich Parts Using Mycelium as a Binder

LAI JIANG, DANIEL WALCZYK and GAVIN MCINTYRE

• Microstructure of Injected Natural Fiber-Polymer Composite

AHMED ABDENNADHER, TATIANA BUDTOVA and MICHEL VINCENT

• Effects of Surface Treatment on the Moisture Absorption of Short Fibre Nonwoven Kenaf Reinforced-Polypropylene Composites

OSCAR ASUMANI, ROBERT REID and RATNAM PASKARAMOORTHY

• Mycology Matrix Sandwich Composites Flexural Characterization

SONIA TRAVAGLINI, C. K. H. DHARAN and PHILIP G. ROSS

SESSION XIX: INTEGRATED COMPUTATIONAL MATERIALS ENGINEERING

• In-situ Experiments with X-Ray Micro-Computed Tomography

MARK KISTNER, SIRINA SAFRIET, KEVIN HOOS, DAVID MOLLENHAUER and CHAD RYTHER

• Three-dimensional Imaging and Numerical Reconstruction of Graphite/Epoxy Composite Microstructure Based on Ultra-High Resolution X-Ray Computed Tomography

MICHAEL W. CZABAJ, MARK L. RICCIO and WILLIAM W. WHITACRE

• Characterization of Strain Distribution in a Reinforced Rubber-Matrix Composite Using Digital Volume Correlation

DAVID MOLLENHAUER, SIRINA SAFRIET, MICHAEL SUTTON, HUBERT SCHREIER, MARK KISTNER and ERIC ZHOU

• Hypervelocity Impacts on Metallic Foam core Sandwich Panels Filled with Shear Thickening Fluid

JUSTIN WARREN, SEAN OFFENBERGER, THOMAS LACY, SANTANU KUNDU, HOSSEIN TOGHIANI and CHARLES U. PITTMAN JR.

• Effect of Temperature on Shear Thickening Fluid Rheology

JUSTIN WARREN, SANTANU KUNDU, SEAN OFFENBERGER, THOMAS LACY, HOSSEIN TOGHIANI and CHARLES U. PITTMAN JR.

• Wavelet Spectral Finite Element Modeling of Laminated Composite Beams with Complex Features

ASHKAN KHALILI, DULIP SAMARATUNGA, RATNESHWAR JHA and S. GOPALAKRISHNAN

• A New Multi-Physics Molecular Dynamics Finite Element Method for Designing Graphene Composite Nano-Structures to Target Property Specifications

ANDRE A. R. WILMES and SILVESTRE T. PINHO

• Automated Microstructure-Properties Characterization and Simulation in Brittle Matrix Continuous Fiber Reinforced Composites

CRAIG P. PRZYBYLA, STEPHAN BRICKER, JEFF SIMMONS and RUSSELL HARDIE

• Integration of Multi-Scale Modeling of Composites under High Strain Rate Impact with Surrogate

SHU SHANG, NAM H. KIM and MINHYUNG LEE

• A Mesh Superposition Technique for the Simulation of the Mechanical Response of Composite Materials at Multiple Length and Time-Scales

LUIGI GIGLIOTTI and SILVESTRE T. PINHO

• An Efficient, Adaptive Multiscale Modeling Methodology for Simulating the Progressive Failure of Composite Materials

TRENTON M. RICKS, THOMAS E. LACY, JR. BRETT A. BEDNARCYK and STEVEN M. ARNOLD

• Efficient Coupling of Micro/Macroscale Analyses with Stochastic Variations of Constituent Properties

KEITH MCWILLIAMS, TRENTON M. RICKS, THOMAS E. LACY JR., SAMIT ROY and RATNESHWAR JHA

• Multiscale Investigation of Free Edge Effects in Laminated Composites

CHRISTOPHER CATER and XINRAN XIAO

• Simulation of Micro-Scale Mode-I Fracture in a Composite Lamina

TIMOTHY D. BREITZMAN, DAVID H. MOLLENHAUER, ENDEL V. IARVE, ERIC G. ZHOU and KEVIN H. HOOS

• Durability of E-Glass Vinyl Ester Composite Structures and Their Modeling in ABAQUS

SHAHRAM ESLAMI, ABBAS HONARBAKHSH RAUF and SHIVA ESLAMI

SESSION XX: STRUCTURAL OPTIMIZATION

• Multi-Step Design Optimization of Variable Stiffness Composite Cylinders Made by Fiber Steering

MOHAMMAD ROUHI, HOSSEIN GHAYOOR, SUONG V. HOA and MEHDI HOJJATI

• Analysis and Sizing of Composite Anisogrid Cylindrical Structures without Skin

JAMES AINSWORTH

• Optimization of Sandwich Panel Parameters for Enhanced Structural Performance using Homogenization Methodology

ARUN GARG, VIKRAM YADAMA and WILLIAM F. COFER

• Stacking Sequence Optimization of Stiffened Composite Plate with Constraints of Residual Deformation and Buckling

AKIRA TODOROKI, YOSHIRO SUZUKI and TAKUMI OZAWA

• Layup Optimization of Symmetrically Laminated Plates Considering Damping Characteristics using Lamination Parameters

MASAKI KAMEYAMA

• Vibration Analysis of Laminated Composite Plates Having Rigid Body Attachments

YOSHIHIRO MARITA, SHINYA HONDAL and TAKAHIRO FUNAMIZU

SESSION XXI: UNCERTAINTY QUANTIFICATION

• Effects of Architectural Variability on the In-Plane Strength of a Woven Ceramic Matrix Composite

MARLANA B. GOLDSMITH, BHAVANI V. SANKAR and RAPHAEL T. HAFTKA

• A Robust Modeling Approach for Fatigue Damage in Composites Based on Bayesian Model Class Selection

JUAN CHIACHIO, MANUEL CHIACHIO, SHANKAR SANKARARAMAN, ABHINAV SAXENA and KAI GOEBEL

• Identification under Uncertainty of Material Properties of Composite Sandwich Panels

SYLVAIN LACAZE, SAMY MISSOUM, FARBOD ALIJANI and MARCO AMABILI

SESSION XXII: NDE & SHM

• Monitoring Fatigue Damage Propagation in GFRP Using Carbon Nanotubes

MAHMOUD REDA TAHA, EMAN OMAR TAHA and MONEEB GENEDY

• Damage Detection with Carbon Nanotube-Based Sensing Composites

THOMAS SCHUMACHER, ERIK T. THOSTENSON, HONGBO DAI and GERARD GALLO

• Comparison between Grid Points and Grid Lines for Detecting, Locating and Quantifying Damage in Large Polymer Composite Structures Made of Electrically Non-Conductive Fibers and Carbon Nanotube Networks

ALI NAGHASHPOUR and SUONG VAN HOA

• Full-Spectral Measurements of Fiber Bragg Grating Sensors Embedded in Composites for Damage Monitoring

SEAN WEBB, KYLE OMAN, KARA PETERS, MOHAMMED ZIKRY, RICHARD SELFRIDGE and STEPHEN SCHULTZ

• Detection of Defects in Composites by Limited-Angle Tomography

YURI NIKISHKOV, EKATERINA BOSTAPH and ANDREW MAKEEV

• Fiber Bragg-Grating Sensors for SHM and FEM of In-Service Bonded Multi-Material Pi-Joints

ANTON KHOMENKO, ERMIAS G. KORICHO and MAHMOODUL HAQ

• High Temperature-Measurement Using Fiber Bragg Grating Sensor for SHM Applications on Composites

DAE-HYUN KIM, DONGHOON KANG and HEON-YOUNG KIM

• New Perspectives for Material Characterization and Structural Diagnostics of Composites

ANDREW MAKEEV, YURI NIKISHKOV, GUILLAUME SEON and ERIAN ARMANIOS

• Quantification of Memory Effect in Composites under Fatigue for Precursor Damage Analysis

SOURAV BANERJEE, SUBIR PATRA and AGBASI CHIJIOKE

• Identification of Debonding in CFRP Stiffened Panels using Pattern Recognition

PRASHANTH ABRAHAM VANNIAMPARAMBIL, RAMI CARMI, FUAD KHAN, IVAN BARTOLI and ANTONIOS KONTSOS

• Structural Health Monitoring of Composite Wind Turbine Blades Using Diffuse Ultrasonic Fields and Reciprocity

JEFFERY D. TIPPMANN and FRANCESCO LANZA DI SCALEA

• NDE and SHM Simulation for CFRP Composites

CARA A. C. LECKEY and F. RAYMOND PARKER

• Predicting Remaining Useful Life in CRFP Laminates under Fatigue Loads: A New Efficient Logarithm

M. CHIACHIO, J. CHIACHIO, S. SANKARARAMAN, A. SAXENA and K. GOEBEL

• Acoustic Emission as a Tool in Monitoring Fatigue Damage Accumulation in Fiber Reinforced Metal Laminate

RAMI CARMI, ARIE BUSSIBA, IGAL ALON, PRASHANTH ABRAHAM VANNIAMPARAMBIL, JEFFERSON CUADRA, UTKU GUKLU and ANTONIOS KONTSOS

• Damage Accumulation Profile and Fracture Event Sequence of Particulate Metal Matrix Composite Monitored by Acoustic Emission

ARIE BUSSIBA, RAMI CARMI, SHLOMO HAROUSH, IGAL ALON and RONI SHNECK

• A Multispectral Nondestructive Approach for Image-Based Damage Monitoring

SATISH RAJARAM, PRASHANTH ABRAHAM VANNIAMPARAMBIL, JEFFERSON CUADRA, ADITI RAMADURGAKAR, IVAN BARTOLI and ANTONIOS KONTSOS

• Vibration Attenuation of Composite Moving Beams Using Active Vibration Control

GOUTHAMI POLINA and NITHI TI SIVANERI

• Development and Evaluation of Residual Stress/Strain Reduction Method in Thick CFRP Pipes

KAZUNORI TAKAGAKI, SHU MINAKUCHI and NOBUO TAKEDA

• VaRTM and Cure Process Monitoring by Fiber Optic Strain and Cure-Index Sensors

TATSURO KOSAKA, TOMOHIRO TERAMACHI and KAZUHIRO KUSUKAWA

SESSION XXIII: PROGRESSIVE DAMAGE MODELING

• Predicting Crippling Failure in Composites Using Progressive Failure Analysis

ALEX SELVARATHINAM, LORI FLANSBURG, SCOTT NORWOOD and STEPHEN ENGELSTAD

• Experimental and Numerical Determination of Notched Composite Strength

BILEL AIDI and SCOTT W. CASE

• Quantitative Assessment of Progressive Damage Tools for Composites

STEPHEN CLAY and RICHARD HOLZWARTH

• Evolution of Surface Oxide Layer and Oxidation-Induced Dimensional Changes during Passive Oxidation of Silicon Carbide

PADMALATHA KAKANURU, JIANGYONG LIANG and KISHORE POCHIRAJU

• Finite Element Analysis of Thermo-Mechanical and Failure Properties of Hybrid Fiber Composites

SAYAN BANERJEE and BHAVANI V. SANKAR

• Application of the Embedded Element Technique to Predict Interlaminar Failure

MATHEW W. JOOSTEN, CHUN H. WANG, ADRIAN MOURITZ, AKBAR AFAGHI KHATIBI, STEVEN AGIUS, MATTHEW DINGLE, BARRY TRIPPIT and BRIAN COX

• Three-Dimensional Modeling of Unidirectional Composites with Fiber Fracture: Role of Matrix Properties

RAJA GANESH, SUBRAMANI SOCKALINGAM, JUN MISUMI, AHMAD ABU-OBAID and JOHN W. GILLESPIE JR.

• Prediction of Failure Behavior of Pin Loaded Glass Fiber Reinforced Polymer Straps

MELEK ESRA ERDEM, BETUL PELIN ERGUL, YUSUF ULU, GOKHAN TURSUN and LEVEND PARNAS

• Damage Simulation in Non-Crimp Fabric Composite Plates Subjected to Impact Loads

ARUNKUMAR SATYANARAYANA, PHILIP B. BOGERT, VENKAT AITHARAJU, SATVIR AASHAT and HAMID KIA

• A Promising Way to Model Damage in Composite and Dry Fabrics Using a Discrete Element Method (DEM)

FREDERIC DAU, LAURENT MAHEO, BA DANH LE and JEREMIE GIRARDOT

• A Technique for Mapping Characteristic Lengths to Preserve Energy Dissipated via Strain Softening in a Multiscale Analysis

EVAN J. PINEDA, BRETT A. BEDNARCYK and STEVEN M. ARNOLD

• Damage Analysis of Composites Using a Three-Dimensional Damage Model: Micro-Scale Architectural Effects

BRETT A. BEDNARCYK, BERTRAM STIER, JAAN-W. SIMON, STEFANIE REESE, EVAN J. PINEDA and STEVEN M. ARNOLD

• Challenges in Modelling of Lightning-Induced Delamination: Effect of Temperature-Dependent Interfacial Properties

PARIA NAGHIPOUR, EVAN J. PINEDA and STEVEN ARNOLD

SESSION XXIV: MOLECULAR MODELING OF MATERIALS

• Study of the Interaction of Silica Glass Surface with Water and Silane Coupling Agent

SANJIB C. CHOWDHURY, BAZLE Z. (GAMA) HAQUE and JOHN W. GILLESPIE, JR.

• Molecular Dynamics Simulations of Nanoporose Iron to Evaluate the Influence of Porosity on the Mechanical Strength

MARTIN HUMMEL, CONSTANTIN BOHM, PETER BINKELE and SIEGFRIED SCHMAUDER

• Tailoring Fracture Toughness of Silicon Carbide Ceramics Film via Nanoscale Multi-Layering with Diamond

SHIEKH F. FERDOUS and ASHFAQ ADNAN

• Multiscale Analysis for Characterizing Fracture Toughness of Trabecular Bone-Like Materials

MD FARZAD SARKER and ASHFAQ ADNAN

• Molecular Dynamics Simulation Study of Reactive Encapsulation of Solvent in Epoxy Curing

CHANGWOON JANG, MAJID SHARIFI, GIUSEPPE R. PALMESE and CAMERON F. ABRAMS

• Elastic-Plastic Fracture Simulation in Thermoset Resins

TIMOTHY D. BREITZMAN, JAMES C. MOLLER, STEPHEN A. BARR and RAJIV J. BERRY

SESSION XXV: MARINE COMPOSITES

• Response of Carbon-Fiber/PVC Foam Composite Structures Subjected to Oblique Underwater Impulsive Loads

SIDDHARTH AVACHAT and MIN ZHOU

• In-situ Determination of the Fiber/Matrix Interface Tensile Strength

KYLE TOTTEN, BENDER KUTUB and LEIF A. CARLSSON

• Comparison of Low Velocity Impact Properties of MMT, MWCNT and MMT/MWCNT Binary Nanoparticles Modified Carbon/Epoxy Composites Subjected to Marine Environmental Conditioning

MD EKRAMUL ISLAM, TANJHEEL H. MAHDI, MAHESH V. HOSUR, ALFRED TCHERBI-NARTEH and SHAIK JEELANI

• Seawater Absorption in Unidirectional Carbon/Vinylester

LEIF A. CARLSSON and MARYANN FICHERA

• Effect of Water Absorption on Time-Temperature Dependent Strength of Unidirectional CFRP

YASUSHI MIYANO, MASAYUKI NAKADA and YUKI YAMAKITA

• Durability of Glass/Epoxy Nanocomposites Subjected to Synergistic Elevated Temperature and Moisture Conditions

SHAIK ZAINUDDIN, MAHESH HOSUR, CHUKWUMA NWEKE, DAVID PRICE, SHAIK JEELANI and ASHOK KUMAR

• Composites with Tunable Electrical, Thermal and Mechanical Properties: An Approach to Multifunctionality

VASANTH CHAKRAVARTHY SHUNMUGASAMY, DINESH PINISETTY and NIKHIL GUPTA

• Constitutive Equation of Syntactic Foam under Lateral Constraint

RAFID KULLY and KUNIGAL SHIVAKUMAR

• Size Effects in Testing of Carbon Fiber Vinyl Ester Laminate for Marine Application and Damage Evolution

AKAWUT SIRIRUK, ROBIN WORACEK, STEPHEN B. PUPLAMPU, DAYAKAR PENUMADU, PHILIP J. WITHERS, TRISTAN LOWE, NIKOLAY KARDJILOV, INGO MANKE and ANDRE HILGER

• Models for Analysis of the Effective Properties of Hybrid Composites

ANDREY BEYLE, DAVID L. COCKE and ANDREW GREEN

SESSION XXVI: SIMULATION TOOLS FOR COMPOSITES

• Development of a Workflow for the Design of Liquid Composite Moulding Processes

PASCAL HUBERT, CRISTIAN DEMARIA, CASEY KEULEN, CHRISTOPHE MOBUCHON and ANOUSH POURSARTIP

• Through 3D Numerical Simulation and Experimental Visualization to Study the Resin Transfer Molding

HUA ZHAN CHOU, HSUN YANG, CHIH-CHUNG HSU, BAI-JIAN WEI, YUAN YAO and RONG-YEU CHANG

SESSION XXVII: INTERLAMINAR PROPERTIES

• Assessment of Mode II Fracture Tests for Fiber Reinforced Composite Laminates

KUNIGAL N. SHIVAKUMAR, RAGHU PANDURANGA, SIDHARTH K. REDDY, JOHN SKUJINS and SANDI MILLER

• Study of Delamination Onset under Mode-II Loading in Translaminar Reinforced Composites Using Acoustic Emission Techniques

VIPUL RANATUNGA and STEPHEN CLAY

• Standardization of the End-Notched Flexure Test for Mode II Delamination Toughness Determination of Unidirectional Laminated Composites

BARRY D. DAVIDSON

• Three-Dimensional Crack Surface Evolution in Mode III Delamination Toughness Tests

ALLISON L. JOHNSTON, MICHAEL W. CZABAJ, BARRY D. DAVIDSON and JAMES G. RATCLIFFE

• Fracture Toughness of Carbon Fiber Laminates Including Carbon Nanotubes

ELISA BOROWSKI, SHERIF ABOUBAKR, ESLAM SOLIMAN and MAHMOUD REDA TAHA

• Shear Properties of Carbon Fiber/Epoxy Composite

KIMIYOSHI NAITO

• A Methodology for Realistic Delamination Growth Prediction Based on Fractographic Observations

EMILE S. GREENHALGH, CARLA CANTURRI and SILVESTRE T. PINHO

• Validation of Material Models for Inter- and Intra-Laminar Damage in Laminated Composites

MICHAEL BRUYNEEL, JEAN-PIERRE DELSEMME, ANNE-CHARLOTTE GOUPIL, PHILIPPE JETTEUR, CEDRIC LEQUESNE, TADASHI NAITO and YUTA URUSHIYAMA

SESSION XXVIII: SANDWICH PANELS

• Response of 3D Fiber Reinforced Foam Core Sandwich Structures at Cold Temperatures

ZACHARY T. KIER, DHRUV N. PATEL, VINAY K. GOYAL, JACOB I. ROME, GARY L. STECKEL and ANTHONY M. WAAS

• Foam Heat Treatment and Its Effects on Strength of Sandwich Composites

JACOB I. ROME, VINAY K. GOYAL, DHRUV N. PATEL and ZACHARY T. KIER

• Failure Analysis of Unvented Honeycomb Structures

VINAY K. GOYAL, JAMES P. TUCK-LEE, JACOB ROME and ERIC LUNDGREN

• Fiber Optic Strain Measurement in Design of Sandwich Beam Flexure Specimens

JUDDSON FROST and MARICRUZ CARRILLO

SESSION XXIX: CIVIL STRUCTURES

• Testing and Evaluation of GFRP Sandwich Bridge Deck Panels Filled with Polyurethane Foam

HESHAM TUWAIR, JEFFERY VOLZ, MOHAMED ELGWADY, MOHANED MOHAMED,
K. CHANDRASHEKHARA and VICTOR BIRMAN

• Lateral Load-Displacement Response Analysis of RC Columns Wrapped by FRP Composites

CHUNG-SHENG LEE, CHUNG-CHEN CHOU and HAO-HSIANG TENG

• Structural Testing of Dual-Core Self-Centering Braces with FRP Bars and FRP Wide-Flange Beams

CHUNG-CHE CHOU, PI-FAN SUN and YING-CHUAN CHEN

• Assessing Effectiveness of FRP in Corrosion Repair

CHANDRA KHOE, RAJAN SEN and VENKAT R. BHETHANABOTLA

• Engineering FRP-to-Concrete Bonded Joints for Better Durability

SHAHROOZ AMIDI and JIALAI WANG

• Upgrading GFRP Bolted Lap Joint Capacity Using Carbon Nanotubes

MONEEB GENEDY, MICHELLE BEGAYE and MAHMOUD REDA TAHA

• Deformation of CRFP Rods with Different Surface Profiles under Transverse Compressive Loading

JONATHON D. TANKS and STEPHEN R. SHARP

SESSION XXX: FATIGUE AND FRACTURE

• Improved Composite Fatigue Testing using Adaptive Frequency Control

PETER B. S. BAILEY, CHRISTIAN HOEHL, PAYAM JAMSHIDI, CHRIS COWAN and LORENZO MAJNO

• A Novel Method for Characterizing Fatigue Delamination Growth under Mode I Using the Double Cantilever Beam Specimen

N. V. DE CARVALHO and G. MURRI

• Characterization of the Fibre Bridging Contribution in Mode I Fatigue Delamination in Composite Laminates

LIAOJUN YAO, R. C. ALDERLIESTEN, MEIYING ZHAO and RINZE BENEDICTUS

• Influence of Mixed Mode I-Mode II Loading on Fatigue Delamination Growth Characteristics of a Graphite Epoxy Tape Laminate

JAMES G. RATCLIFFE and WILLIAM M. JOHNSTON JR.

• Extracting Interlaminar Cohesive Laws from Displacement Field Measurements

MEISAM JALALVAND, GERGELY CZEL and MICHAEL R. WISNOM

• Fracture of Composite Laminates with Integrated XFEM-CE

TONG-EARN TAY, XIU-SHAN SUN and VINCENT BENG CHYE TAN

• Damage Initiation and Propagation Modeling in Laminated Composites under Fatigue Loading

ENDEL V. IARVE, KEVIN H. HOOS and DAVID H. MOLLENHAUER

• The Multi-Scale Modeling of Fatigue and Failure of Continuous Fiber Composites

BENOIT BIDAINE, LAURENT ADAM, JEAN-SEBASTIEN GERARD, THIERRY MALO and ROGER ASSAKER

• Modeling Quasi-Static and Fatigue-Driven Delamination Migration

N. V. DE CARVALHO, J. G. RATCLIFFE, B. Y. CHEN, S. T. PINHO, P. M. BAIZ and T. E. TAY

• Fatigue Behavior of 3D Woven Pi-Preform Joints

ERMIAS G. KORICHO, ANTON KHOMENKO and MAHMOODUL HAQ

• Failure Analysis of a Star Segment

RENE ROOS, DOUGLAS WEBER-STEINHAUS and MAYURAN S. MUTTULINGAM

SESSION XXXI: TEMPERATURE EFFECTS

• Elevated-Temperature Thermal Expansion Coefficients of PTFE/PEEK Composites: Experiments and Modeling

GANG LIU and SU SU WANG

• Thermal Stresses in Composites Induced by Heat Flow

SEIICHI NOMURA

• Novel Computational Framework for Thermal Shock Resistance Design of Carbon Composites

ALMA LEANOS, MD SHARIFUL ISLAM and PAVANA PRABHAKAR

• Evaluation of Electrical and Thermal Properties of Titanium Boride Dispersed Aluminum Composites by Spark Plasma Sintering Process

GEN SASAKI, OKYONG LEE, TAKAAKI HIROSE, KOTA ISHIKAWA, KENJIRO SUGIO, YONGBUM CHOI and KAZUHIRO MATSUGI

• Synthesis and Properties of Multi-Functional Epoxy Resins Containing Naphthalene Units

YUTAKA SATO, KOJI HAYASHI and KAZUO ARITA

• Thermal Resistant Polymers for Microelectronic Applications

XI MIN LAW, ALEX BREWER, JARED M. PETTIT, RONALD JOVEN and JOHN C. MOORE

• Effects of Sizing on Thermal Conductivity of Single Carbon Fibers in Longitudinal and Radial Directions

JORDAN A. WHETSELL, JUNFENG LIANG, MRINAL C. SAHA and M. CENGIZ ALTAN

SESSION XXXII: COMPUTATIONAL COMPOSITE ENGINEERING

• Data Assimilation for Integration of Electrical Measurements and Stochastic Flow Simulation of VaRTM

RYOSUKE MATSUZAKI, MASAYUKI MURATA, AKIRA TODOROKI and YOSHIHIRO MIZUTANI

• New Analytical Method of Electric Voltage Change of Delaminated CFRP Using Anisotropic Electric Potential Function

AKIRA TODOROKI

• Multi-Disciplinary Design Approach and Structural Sizing on Composite Wing

YOSHIYASU HIRANO, JUNICHI KATSUMI, TOMONAGA OKABE and KEISUKE SAWADA

• Numerical Simulation of Out-of-Plane Impact and Compression after Impact Test on CFRP Laminates

RYO HIGUCHI, TOMONAGA OKABE and KENICHI YOSHIOKA

• Prediction of Shear-Cutting Process of CFRP Cross-Ply Laminates Using Smoothed Particle Hydrodynamics

SHIGEKI YASHIRO, RYUJI ONO, KEIJI OGI and YOSHIHISA SAKAIDA

• Molding Simulation of Prepreg with Slits by Particle Method

HIROAKI MATSUTANI, ICHIRO TAKETA and KIYOSHI ENOMOTO

• Multiscale Simulation of CFRP Plate Structure by Using Homogenization Method

AKINORI YOSHIMURA, YUICHIRO TAJIMA, TOMONAGA OKABE and YOSHIKI MORINO

• A Novel Strength Model with Increased Flexibility for Predicting Failure of Unidirectional Fiber-Reinforced Composites

Y. SWOLFS, R. M. MCMEEKING, L. GORBATIKH and I. VERPOEST